- Non ci sono più articoli nel tuo carrello
- Spedizione Gratis
- Totale 0,00 €
Marchi
AUDIX F6 DYNAMIC INSTRUMENT MICROPHONE
AUF6
Valutazione
AUDIX F6 DYNAMIC INSTRUMENT MICROPHONE
-
Politiche per la sicurezza (modificale con il modulo Rassicurazioni cliente)
-
Politiche per le spedizioni (modificale con il Modulo rassicurazioni cliente)
-
Politiche per i resi merce (modificale con il Modulo rassicurazioni cliente)
Descrizione
OVERVIEW
Designed, assembled and tested by Audix in the USA, the f6 is a dynamic instrument
microphone used for live sound, stage, home and studio. The f6 is characterized with
a hypercardioid pickup pattern for isolation and feedback control and equipped with
a LM™Type A (Low Mass) diaphragm for natural, accurate sound reproduction.
The f6 is compact and easy to position. With a wide frequency response of 40 Hz - 16
kHz and the ability to handle sound pressure levels of 140 dB, the f6 is an excellent
choice for miking instruments requiring extended low frequency reproduction such
as kick drum, large toms and bass cabinets.
The f6 is manufactured with a precision cast zinc alloy body, durable black E-coat
finish, dent resistant steel mesh grill, and gold plated XLR connector. Transformerless
design, low impedance and balanced output allow for interference-free performance
even with long cable runs.
Supplied accessories:
- DCLIP: Heavy-duty nylon molded snap on clip
- P1: Carrying pouch
Applications:
- Live Stage , recording
- Kick Drum
- Kettle drum, floor tom
- Bass Cabinets, Leslie bottom
Specifications:
- Transducer Type: Dynamic
- Frequency Response: 40 Hz - 16 kHz
- Polar Pattern: Hypercardioid
- Output Impedance: 580 ohms
- Sensitivity: 1.2 mV / Pa @ 1k
- Capsule Technology: LM Type A
- Off Axis Rejection: >23 dB
- Maximum SPL: =140 dB
- Power Requirements: None
- Connector: 3-pin XLRm
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output, XLR connector
- Materials / Finish: Zinc Alloy / Black Finish
- Weight: 311 g / 11 oz
- Length: 121 mm / 4.76 in
Designed, assembled and tested by Audix in the USA, the f6 is a dynamic instrument
microphone used for live sound, stage, home and studio. The f6 is characterized with
a hypercardioid pickup pattern for isolation and feedback control and equipped with
a LM™Type A (Low Mass) diaphragm for natural, accurate sound reproduction.
The f6 is compact and easy to position. With a wide frequency response of 40 Hz - 16
kHz and the ability to handle sound pressure levels of 140 dB, the f6 is an excellent
choice for miking instruments requiring extended low frequency reproduction such
as kick drum, large toms and bass cabinets.
The f6 is manufactured with a precision cast zinc alloy body, durable black E-coat
finish, dent resistant steel mesh grill, and gold plated XLR connector. Transformerless
design, low impedance and balanced output allow for interference-free performance
even with long cable runs.
Supplied accessories:
- DCLIP: Heavy-duty nylon molded snap on clip
- P1: Carrying pouch
Applications:
- Live Stage , recording
- Kick Drum
- Kettle drum, floor tom
- Bass Cabinets, Leslie bottom
Specifications:
- Transducer Type: Dynamic
- Frequency Response: 40 Hz - 16 kHz
- Polar Pattern: Hypercardioid
- Output Impedance: 580 ohms
- Sensitivity: 1.2 mV / Pa @ 1k
- Capsule Technology: LM Type A
- Off Axis Rejection: >23 dB
- Maximum SPL: =140 dB
- Power Requirements: None
- Connector: 3-pin XLRm
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output, XLR connector
- Materials / Finish: Zinc Alloy / Black Finish
- Weight: 311 g / 11 oz
- Length: 121 mm / 4.76 in
Recensioni
Ancora nessuna recensione da parte degli utenti.
16 altri prodotti della stessa categoria: